DNS Settings for Windows 2000
Go to your start bar and left click on the "Start" button. Go up to "Settings" and left click on "Control Panel".
Find and open the icon
"Dial-Up and Network Connections".
Once in the 'Network and Dial-up Connections' folder,
double-click on 'Make New Connection'. This process will
start the Network Connection Wizard. If this is your first time
setting up a connection, Windows 2000 will prompt your for your
'Location Information'. Please fill out this section accurately
for your area code and dialing information. Click 'OK' when
finished.
Next, you will need to accept the new configuration information by clicking 'OK' in the 'Phone And Modem Options'.
Select 'Dial-up to the Internet (Connect to the Internet using my phone line [modem or ISDN])'. Click 'Next.
This will start the 'Internet Connection Wizard'. Select the last option 'I want to set up my Internet connection manually, or I want to connect through a local area network (LAN). Click 'Next
Select 'I connect through a phone line and a modem' under 'Setting up your internet connection'.
The 'Internet
Connection Wizard' will continue to setup your Industry I-Net
dial-up connection. Step 1 of 3: Enter the phone number. Click
'Next to continue to step 2 of 3
Step 2 of 3: Enter your username and password. Your username and
password must be entered exactly how they were given to you. Once
you have completed this section, click 'Next.
Step 3 of 3: Enter I-Net under 'Connection name Click 'Next to continue.
Your computer is now ready to connect to the Internet using your I-Net account. All setting should be configured properly by Windows 2000 automatically. If you would like to setup your mail account using Outlook Express select 'Yes'. Click 'Next to continue. If you clicked 'Yes' to set up Outlook Express, please continue with the configuration. If you select 'No', click 'Next.
Then click 'Finish'
Dial-up Connection pop-up menu will come up. You can click 'Connect' to dial-in to I-Net.
Use the "Right" mouse button to click Once on the I-Net Icon and choose "Properties". (use left mouse button from now on) Click on the "Networking" Tag.
Choose "PPP:Internet,WindowsNT
Server,Win98" in Type of Dial-up Server. Make sure only
"Enable software compression" is checked in the
Advanced option section.
Make sure only "TCP/IP" is checked in the Allowed
network protocol section.
Click on "TCP/IP" settings
Make sure "Server Assigned IP address" is chosen
Make sure "Server Assigned Name Server addresses" is chosen.
Make sure the "Enable IP header compression" is not checked and "Use default gateway" is checked ...then click OK...OK...and again...OK
Finally, double click the "I-Net" Icon and provide the username (your login ID) and password (remember login id and password are case-sensitive).
Click on "Connect" button. This should allow your modem to connect with our servers.
Now minimize the connection screen and proceed to use any Internet application that you want to use such as Eudora, Netscape, Internet Explorer, etc.....Note: If you do not see Dial-Up Networking in Control Panel, then the component is not installed.
